Transparent Pricing. No Surprises.
We publish our prices because we believe in transparency. Most HVAC companies won't tell you what anything costs until they're sitting in your living room. We're different.
A properly designed system saves nearly $1,000 per year in operating costs compared to a poorly installed one. Over 30 years, that's $27,700 back in your pocket.
See the data
You can have Good, Cheap, or Fast — pick two. We chose Good.
HVAC Design Tiers
Every tier includes Manual J, Manual S, and Manual D calculations. Higher tiers add tighter comfort tolerances, better equipment requirements, and our performance guarantee.
Up to 2,500 sq ft ($0.40/sq ft) · +$0.32/sq ft over 2,500
- Single-stage equipment
- 75°F cooling / 70°F heating
- ±3°F delta per zone/floor
- 1°F drop in 20–40 min runtime
- Remedy cap: $10,000 ($3K pre / $7K post)
- Manual J, Manual S, basic Manual D
- Stamped plans (1 revision)
- 72-hour response, 1–14 day scheduling
- Phone support during inspections
Up to 4,000 sq ft ($0.75/sq ft) · +$0.44/sq ft over 4,000
- Two-stage equipment required
- 73°F indoor cooling / 72°F heating
- ±2°F delta
- 1°F drop in 20–40 min runtime
- Remedy cap: $50,000 ($15K pre / $35K post)
- Full Manual D with CFM verification
- Manual T register selection
- 48-hour response, 1–10 day scheduling
- 1 included onsite visit
Up to 5,000 sq ft ($1.00/sq ft) · +$0.55/sq ft over 5,000
- Modulating or zoned required (cannot be single-stage)
- Below 70°F cooling / Above 75°F heating
- ±1°F delta
- 1°F drop in 20–40 min runtime
- Remedy cap: $100,000 ($30K pre / $70K post)
- Full commissioning report, ADPI where applicable
- 24-hour response, 1–7 day scheduling
- Included onsite visits (24 months from cert)
- Unlimited diagnostics (parts/materials billable unless design error)
Pricing Examples by Home Size
| Home Size | Standard | Premium | Elite |
|---|---|---|---|
| 2,500 sq ft | $1,000 | $3,000 | $5,000 |
| 3,247 sq ft | $1,239 | $3,000 | $5,000 |
| 3,814 sq ft | $1,420 | $3,000 | $5,000 |
| 4,000 sq ft | $1,480 | $3,000 | $5,000 |
| 4,618 sq ft | $1,678 | $3,272 | $5,000 |
| 4,923 sq ft | $1,775 | $3,406 | $5,000 |
| 5,000 sq ft | $1,800 | $3,440 | $5,000 |
| 5,348 sq ft | $1,911 | $3,593 | $5,191 |
| 6,275 sq ft | $2,208 | $4,001 | $5,701 |
Customize Your Project
Only pay for what you need. These can be added to any tier.
| Add-On | Description | Price |
|---|---|---|
| Onsite visit | Site visit for inspection or coordination | $275+ |
| Pre-sheetrock testing | Duct testing before walls close up | +$600–$800 (included in Elite) |
| Duct leak testing | Third-party certified testers | Call for pricing |
| ADPI verification | Air diffusion performance index measurement | Add-on all tiers — call for pricing |
| Jet mapping / flow mapping | Airflow pattern documentation | +$200/hour |
| Additional revision | Design revisions beyond included — increases per revision | Starting at +$150 |
| Rush delivery | Under 5 business days turnaround (minimum $500) | +25% |
| Complex geometry | Cathedral ceilings, cantilevers, etc. | +15% |
Performance Audit Pricing
Find out why your home isn't comfortable. We test, measure, and give you a gameplan with real numbers.
| Service | Fee |
|---|---|
| Block Load (0–5,000 sq ft) | $800–$1,200+ | +$0.19/sq ft over 5,000 |
| Room-by-Room (0–5,000 sq ft) | $1,800+ | +$0.25/sq ft over 5,000 |
| Major Projects (up to 10,000+ sq ft) | Custom quote — discount applied |
Equipment Upcharges
- Additional single-stage system: +$200
- Two-stage upcharge: +$324/system
- Modulating upcharge: +$444/system
- 4-Point Static Curve: +$200
- LiDAR scan (no blueprints): +$2,500 up to 5K sq ft + $0.29/sq ft over
Emergency Service & Tune-Up Pricing
| Item | Details | Price |
|---|---|---|
| Base service call | First system, up to 2.5 hours including drive time | $275+ |
| Additional single-stage system | Each additional HVAC system | +$200 |
| Two-stage equipment | Per two-stage system | +$324/system |
| Modulating equipment | Per modulating/variable-speed system | +$444/system |
| Both static checks | Blower side AND duct side static pressure | +$200 |
| Chemical condenser cleaning | Chemical wash of outdoor condenser coil | +$375 |
| Evap coil pull & clean | Remove and deep clean evaporator coil | +$700–$900 |
| Blower assembly pull & clean | Remove and clean blower assembly | +$225 |
| Burner compartment cleaning | Deep clean burner compartment | +$175 |
| Refrigerant | Market price per pound — fluctuates based on supply, demand, and EPA regulations | Market price |
Baker's Dozen — Repeat Customer Loyalty Program
Buy 12 projects at standard pricing, get your 13th project FREE.
The free project is valued at the average of your 12 paid projects. You have 90 days after email notification to use it. Want to upgrade? Just pay the difference. No qualifying time frame — just 12 total projects, whenever that happens. Repeat customers only.
Simple, Fair Payment
Additional work quoted separately. No hidden fees.
Ready to Get Started?
Tell us about your project and we'll give you an exact quote. No surprises, no hidden fees.
Get Your Quote